Select your language

 

Brushes for String Trimmers

Brushes for String TrimmersBrushes for string trimmers for environmentally friendly, mechanical weed removal on small, paved areas or in small areas where a sweeper cannot reach the weeds. Suitable for use with almost any string trimmer. Brushes for string trimmers are offered as disposable and reusable systems.

Disposable Brushes for String Trimmers:
Knot Brushes and Cone Brushes

The weed cone brush and the knot brush are small disposable plate brooms for the mechanical removal of weeds, wild weeds and dirt from paved surfaces with powerful power scythes / brush cutters. This is an environmentally friendly and quick way to remove weeds.

The cone brush is equipped with fine stranded corrugated wire and has a diameter of approx. 250mm. It is suitable for brush cutters/motor scythes from a power of 1.6kW.

The knot brushes are offered in two sizes:

  • The small knotted brush has a diameter of 150mm and 32 knots.
    It is suitable for brush cutters/motor scythes with a power of 1.4 kW or more.
  • The large knotted brush has a diameter of 180mm and 36 knots.
    It is suitable for brush cutters/motor scythes with a power of 1.6 kW or more.

The wild cautery brushes can be supplied with a 20mm or 25.4mm intake (this corresponds to the inner diameter of the grass cutting blade). The brushes are designed for a maximum of 10,000 rpm.

Protective clothing is compulsory. Safety instructions are enclosed.

All information without guarantee - the world is changing.

One one brush and two knot brushes
Cone brush and knot brushes

Detail of a cone brush
Detail cone brush

Detail of a knot brush
Detail of a knot brush

Reusable Brushes for String Trimmers:
Armigo®, Armigo®2,  Triplo

With this reusable system, the brush head can remain on the brush cutter while only the brush tufts / braids are replaced.

Armigo®, Armigo®2 and Triplo are disc brooms for mechanical weed removal from paved surfaces, in gutters, corners and around or under obstacles - e.g. on cobblestones, under park benches and in gutters.

These systems are characterised by the fact that the steel wire ropes of the brush tufts/braids fan out as they come into contact with the ground due to the rotational movement of the brush cutter head. The result is a soft, small weed plate that can be used to quickly and effortlessly remove wild weeds from paved areas. When the brush hits an obstacle, such as a corner or kerb, it will only bounce back slightly and can be repositioned with a light push.

The wild cautery brushes can be supplied with a receptacle of 20mm or 25.4mm (this corresponds to the inner diameter of the grass cutting blade).

Armigo®

The Armigo® is suitable for large brush cutters, from 1.6kW.

Armigo®2

As a further development of the Armigo®, the Armigo®2 is significantly lighter (50%) and can be used on smaller brush cutters. It consists of a filigree aluminium plate and two steel wire bristle tufts that can be easily and quickly replaced without tools.

Triplo

The Triplo is a further development of the Armigo®2, now with 3 rope bundles fixed at an angle and the proven tool-free change mechanism. The Triplo is the modern version for environmentally friendly, mechanical weed removal in small areas and in winding terrain. It is equipped with three brush tufts that can be changed without tools. Due to the angle attachment, the bristles are less bent by centrifugal forces and thus wear evenly.

All brushes are designed for a maximum speed of 10,000 rpm.

Protective clothing is compulsory. Safety instructions are enclosed.

 

 

New Armigo® tuft
New Armigo® tuft

Detail Armigo® tuft fanned out
Armigo® tuft fanned out

Triplo
Triplo

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.